EE – 1203 Pour Point Dispersant

We put forth a quality range of Pour Point Depressant EE 1203, which reduces pour point of crude oil and increases its flow properties. Our range of Pour Point Depressant is used in applications where reduction of pour point is main objective. This depressant is recommended for use at 0.5 % to 1 % by weight or volume and as per products needs. It is very specialty Surfactants works as catalyst in basic properties of Liquids.

Key Features:-

  • Improves Free Flow & Gives more Purifications to the Fluids
  • Good Supports to Control Hydrocarbon Chains stability.
  • Prevents Fluids from the Dense and Moisture on Stable conditions.
  • Supports for required Pour points, CFPP regulations .
  • Better dilutions, Simple Solutions., Easy applications.

Applications:-

  • Applications for All types of Crude Oils, Base oils, Petrol, Diesel.
  • Effective on, Bio Diesel & Bio fuels, Ethanol Etc.
  • Plastic waste Pyrolysis & Recycle Rubber Tier waste recovery Oils.
  • Other General Industrial applications.

General Typical Inspection Characteristics:-

  • Specific Gravity at 15.6 ° C, ASTM D-1298 0.969
  • Kinematic Viscosity at 40 °C, IS 1448 CST 100.67
  • Kinematic Viscosity at 100 °C, IS 1448 12.28
  • Viscosity Index IS 1448 114.05
  • Total base number, mg KOH/g, IS 1448 7.26
  • Flash Point IS 1448 101’c to 105’c
  • Pour Point IS 1448 Minus 10’C to Minus 12’c
Enquiry Form

    EE – 1203 Pour Point Dispersant

    We put forth a quality range of Pour Point Depressant EE 1203, which reduces pour point of crude oil and increases its flow properties. Our range of Pour Point Depressant is used in applications where reduction of pour point is main objective. This depressant is recommended for use at 0.5 % to 1 % by weight or volume and as per products needs. It is very specialty Surfactants works as catalyst in basic properties of Liquids.

    Key Features:-

    • Improves Free Flow & Gives more Purifications to the Fluids
    • Good Supports to Control Hydrocarbon Chains stability.
    • Prevents Fluids from the Dense and Moisture on Stable conditions.
    • Supports for required Pour points, CFPP regulations .
    • Better dilutions, Simple Solutions., Easy applications.

    Applications:-

    • Applications for All types of Crude Oils, Base oils, Petrol, Diesel.
    • Effective on, Bio Diesel & Bio fuels, Ethanol Etc.
    • Plastic waste Pyrolysis & Recycle Rubber Tier waste recovery Oils.
    • Other General Industrial applications.

    General Typical Inspection Characteristics:-

    • Specific Gravity at 15.6 ° C, ASTM D-1298 0.969
    • Kinematic Viscosity at 40 °C, IS 1448 CST 100.67
    • Kinematic Viscosity at 100 °C, IS 1448 12.28
    • Viscosity Index IS 1448 114.05
    • Total base number, mg KOH/g, IS 1448 7.26
    • Flash Point IS 1448 101’c to 105’c
    • Pour Point IS 1448 Minus 10’C to Minus 12’c
    Enquiry Form