EE 1208 I – Intermediate Surfactants

Precise Intermediate surfactant additive, which is derived from Specialty oil Used as an intermediate in the processing of oil soluble & partly Water Soluble Dispersants , our range is in compliance with prevailing industry standards. Due to accurate composition and purity, our range is also used in the formulation of emulsifiers

EE 1208 I – Intermediate Surfactants Benefits:-

  • Good wet ability properties.
  • Clean annealing characteristics.
  • Good emulsibility properties in Oil and if require with partial water.
  • Non staining towards metal reactions.
  • Lubricant additives where oil Emulsions require.
  • Drilling fluids for better dilutions.
  • Ideal for Coolants for Color dispersants etc.
  • Useful in Battery water for regulating sulphuric acid. Effective on Polymers, Plastic Wastes, Biomass Waste and its Recycles Process

Handling:-

  • Our range can withstand maximum temperature of flash point of 210°C – 220 °C
  • Temperature required for long-term storage is 40 – 49 °C
  • Ordinary precautions to handle concentrated chemicals and blending additives into base oils should be
    observed

Physical Properties:-

Specifc gravity at 15.6’C ASTM D4052 0.960
Kinematic Viscosity at 40’C IS 1448 100.67
Flash Point (COC) ‘C ASTM D92 220
Kinematic Viscosity, CST at 100’C IS 1448 12.28
Colour, dilute ASTM D1500 3.0
Enquiry Form

    EE 1208 I – Intermediate Surfactants

    Precise Intermediate surfactant additive, which is derived from Specialty oil Used as an intermediate in the processing of oil soluble & partly Water Soluble Dispersants , our range is in compliance with prevailing industry standards. Due to accurate composition and purity, our range is also used in the formulation of emulsifiers

    EE 1208 I – Intermediate Surfactants Benefits:-

    • Good wet ability properties.
    • Clean annealing characteristics.
    • Good emulsibility properties in Oil and if require with partial water.
    • Non staining towards metal reactions.
    • Lubricant additives where oil Emulsions require.
    • Drilling fluids for better dilutions.
    • Ideal for Coolants for Color dispersants etc.
    • Useful in Battery water for regulating sulphuric acid. Effective on Polymers, Plastic Wastes, Biomass Waste and its Recycles Process

    Handling:-

    • Our range can withstand maximum temperature of flash point of 210°C – 220 °C
    • Temperature required for long-term storage is 40 – 49 °C
    • Ordinary precautions to handle concentrated chemicals and blending additives into base oils should be
      observed

    Physical Properties:-

    Specifc gravity at 15.6’C ASTM D4052 0.960
    Kinematic Viscosity at 40’C IS 1448 100.67
    Flash Point (COC) ‘C ASTM D92 220
    Kinematic Viscosity, CST at 100’C IS 1448 12.28
    Colour, dilute ASTM D1500 3.0
    Enquiry Form